Durable Pill Capsule Filling Machine Capsule Filling Equipment With
Low Noise
Product Description of Capsule Filling Machine
The maximum capacity is 3500 grains per minute. Product
standardization and series production: The universal
interchangeability of manufactured parts reaches over 98%, and each
component has a fixed code. The positioning holes for mold
replacement parts have high accuracy in positioning and repeated
positioning; Quick mold change, easy operation, and convenient
cleaning.
Technical Parameters of Capsule Filling Machine
| Model | SED-3500J-C |
| Weight | 2400kg |
| Size | 1440×1300×2080mm |
| Power | 6.37kw |
| Voltage | 3 phase AC 380V;50Hz |
| Capactiy | 210000 pcs/h |
| Capsule size | 00#～5#,safty capsule A～E |
| Noise | ≤75dBA |
Features
High-capacity HD can be record message,meet CGMP,FDA certification
With Japan imported beeline bearings,make sure the machine long
work life and precision of machine
The working station cam runs under the good lubricating condition
and maintaining the inner lubrication of cam slot to a full extent,increasing the pressure pulverization oil
pump,extends the operation life of the spare parts Single movement for both upper and lower segments with two
lip seal provide a much better sealing performance
Adopt the PLC and touch screen control,step-less frequency
conversion motor,all parameter can be set up in the touch screen,make the operation very convenient
Three-dimensional adjustment of the dosing disk, space uniform, to
ensure accurate filling, the capsules yield up to 99%
It has a protector for operation and machine,can auto pause when
the machine lack of capsule or powder,insure the machine running stable,safe.
Add the mold blowing air,sucking air function,insure the mold hole
without dust when fill the capsule.
Working Principle of Capsule Filling Machine
The working principle of the automatic capsule filling machine is
divided into two parts, which are the movement of the capsule and
the filling of the medicine:
1. Movement of the capsule
During the filling process of the intermittent capsule filling
machine, the movement of the capsule depends on the indexing box
for intermittent and discontinuous rotation. The filling volume of
the capsule is mainly determined by the volume of the metering
disc hole. The hollow capsule is in the capsule hopper, the main
board moves up and down, the capsule enters the capsule guide
groove by its own gravity, and then the horizontal fork and the
vertical plug make the capsule cap upward and the
capsule body downward into the upper and lower modules. The capsule
body and capsule cap are separated under the action of the device,
and then the module enters the powder filling station.
2. Drug filling
The sensor in the powder holding ring controls the screw feeding
rod above it, and the medicine is continuously added to make the
height of the powder in the powder holding ring constant. position,
push the drug column into the capsule body. After that, it
enters into the capsule rejection, capsule locking, finished
capsule discharge, module cleaning station in turn, and then enters
a new round of station cycle, and the cycle begins again and again.
Application of Capsule Filling Machine
